PARTS & ACCESSORIES
RESORT LIGHT STRIP
Edge-lit. Use for back-lit displays. Attach strip to extrusion spine, twist knob and lock (by hand). Five (5) LED lights per light strip. Clips included on ends to easily connect more. Transformer included.
Hang lights. Use for back-lit displays. Made like a rope ladder, unroll and hang on included hooks located on top frame, inside. 500mm or 375mm widths to easily accommodate any size back-lit display. Transformer included.
Power supply for Resort Light Strip and Ladder Lights. Two-pron plug.
Hide power cords from LED Lights by adding an on-and-off power switch to display frame.
Free-standing. Available in 2ft, 3ft, 4ft, or 5ft widths.
Free-standing. Aluminum. Attach to bottom tool-free using wing-nuts. Available in 12″ or 16″ lengths and can be used for any size profile width.
Free-standing steel. Attach to sides tool-free using wing-nuts 23.5″W x 18.5″H.
ASPEN CURVED FOOT
Optional curved for ASPEN-40D extrusion frames.
ASPEN SIDE MOUNT FOOT
Optional side mount foot for ASPEN-40D extrusion frames. Includes all necessary hardware to mount foot to frame.
Two (2) side mount feet for extrusion frame. Adjustable at bottom for leveling display when needed. Available only in black. Recommended for ASPEN ONYX, but compatible with silver ASPEN and VAIL.
Optional wheels for T-Legs. Replaces feet. One (1) set of four (4) casters with screws. Two (2) casters equipped with locks to prevent unwanted rolling.
Affix to wall. Screw the wall mounts into the wall, place the frame around mounts, tighten pocket screws slightly to add pressure to frame, then install graphics.
CEILING EYE HOOKS
Hang overhead. This add-on accessory will come to you installed on the frame.
ASPEN CORNER CONNECTOR
Two (2) per corner (one with holes, one without.). Four (4) socket screws and 3mm allen wrench included.
VAIL CORNER CONNECTOR
One (1) per corner. Four (4) socket screws and 3mm allen wrench included.
ASPEN/VAIL SPLIT CONNECTOR
Needed to support cut frames. Displays beyond 8ft. require cuts to ship (unless shipping freight). Insert into both extrusions at the cut, line up holes then tighten screws with Torx key (included).
One (1) per corner. Alternate corner connector. Compatible with all VAIL extrusions. Two (2) screws and allen wrench included.
VAIL TOOL FREE CORNER CONNECTOR
One (1) per corner. Hold two extrusions together to form corner, insert connector into spine of both extrusions and push ends of connector into spine to lock.
VAIL TOOL FREE SPLIT CONNECTOR
Hold two extrusions together to form the straight piece. Insert connector into spine of both extrusions, near or at the cut, and push ends of connector into spine to lock.
Connector piece for custom ALPINE BOOTHS. Used to connect vertical exrtrusions that are cut into two or more pieces.
Lock inserts into Aspen extrusion. Comes installed. Torx key included.
VAIL KEY LOCK
Lock inserts into Vail support extrusion. Comes installed. Torx key included.
Custom acrylic tops, shelves, wings, headers, etc. All are made-to-order. Print and etching upgrades are available.
Aluminum slatwall can be added to most extrusions
Replacement torx key and allen wrench to tighten locks and connectors.
End caps for BIGSKY-32D, BIGSKY-INSIDECORNER, BIGSKY-60D, and BIGSKY-TRIANGLE. Each profil has its own unique end cap.
For ALPINE BOOTHS. Lock with key. Hinge with Screws. Caster on bottom of door to relieve stress on hinge and allows smooth opening and closing of door.
Corresponding horizontal extrusion for the Big Sky vertical extrusion needed to hold SEG in frame.
Inside corner extrusion for a Big Sky Counter or Tower. Makes a negative 90 degree cutout, creating a U-shaped display.
FABRIC GRAPHIC (Non-Backlit) SEG Fabric
Full color dye sublimation edge-to-edge custom print. SEG Fab is a stabilized fabric for optimal print quality. A rigid, knitted fabric with an added 2% stretch and expertly stitched with a silicone-edge, SEG Fabric secures tautly to the frame while preventing image distortion or sagging.
FABRIC GRAPHIC (Back-lit) UV Back-lit
Full color double-strike edge-to-edge custom UV print. UV Back-lit is a universally coated textile for optimal print quality and color pop-perfect for illumination. A rigid, knitted fabric with an dded 2% stretch and expertly stitched with a silicone-edge, UV Back-lit secures tautly to the frame while preventing image distortion or snagging.
Silicon Beading. 3mm thick, 12mm wide.